Shelly Plus I4 Wi-Fi, Bluetooth controller designed for smart home automation
Shelly Plus I4 Wi-Fi, Bluetooth controller designed for smart home automation
Код | S3800235265079 |
Код производителя | 3800235265079 |
Наличие | 16 шт. |
Предполагаемый срок отправки | 1-2 рабочих дней |
20000+ Успешных доставок по всему миру
Стоимость доставки со склада в Таллинне0% VAT для Европейских компаний или клиентов вне Евросоюза
Система автоматически формирует заказы с 0% VAT при соблюдении условийВозможность возврата
14 дней на возврат оборудованияShelly Plus i4
Device identification
-
Device name: Shelly Plus i4
-
Device model: SNSN-0024X
-
Device SSID: ShellyPlusI4-XXXXXX
Short description
Shelly Plus i4 is a smart Wi-Fi switch input that allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use Shelly Plus i4 to control other connected Shelly switches, sensors, or HTTP and MQTT-controlled devices. Small enough to fit behind every wall switch, Shelly Plus i4 can show the status and control the action of four inputs.
You can access and monitor Shelly Plus i4 remotely from any place where you have internet connectivity, if the Device is connected to a Wi-Fi router and the Internet.
You can retrofit the Device into standard electrical wall boxes, behind power sockets, light switches, or into other places with limited space.
Shelly Plus i4 has an embedded Web Interface that you can use to control it and set it up.
Main applications
-
Residential
-
MDU (Multi Dwelling Units - apartments, condominiums, hotels, etc.)
-
Light commercial (small office buildings, small retail/restaurant/gas station, etc.)
-
Government/municipal
-
University/college
Integrations
-
Alexa (through a virtual device routine)
Simplified internal schematics
Device electrical interfaces
Inputs
-
4 switch/button inputs on screw terminal: SW1, SW2, SW3, and SW4
-
3 power supply inputs on screw terminals: 1 N and 2 L
Outputs
N/A
Add-on interface
-
Shelly proprietary serial interface
⚠CAUTION! High voltage on the add-on interface when the Device is powered!
Connectivity
-
Wi-Fi
-
Bluetooth
Safety features
-
Overheating protection
User interface
Inputs
-
One (Reset) button
-
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.
-
Press and hold for 10 seconds to factory reset the Device.
-
Outputs
-
LED (monocolor) indication
-
AP (Access Point) enabled and Wi-Fi disabled:
1 secondON
/ 1 secondOFF
-
Wi-Fi enabled, but not connected to a Wi-Fi network:
1 secondON
/ 3 secondsOFF
-
Connected to a Wi-Fi network:
ConstantlyON
-
Cloud is enabled, but not connected:
1 secondON
/5 secondsOFF
-
Connected to Shelly Cloud:
ConstantlyON
-
OTA (Over the Air Update):
½ secON
/ ½ secondOFF
-
Button pressed and held for 5 seconds:
½ secondON
/ ½ secondOFF
-
Button presses and held for 10 seconds:
¼ secondON
/ ¼ secondOFF
-
The list above starts with the initial device status and the lowest priority. Every next state cancels the previous one.
Specifications
Type |
Value |
---|---|
Physical |
|
Size (HxWxD): |
37x42x16 ±0.5 mm / 1.46x1.65x0.63 ±0.02 in |
Weight: |
18 g / 0.63 oz |
Mounting: |
Wall box |
Screw terminals max torque: |
0.4 Nm / 3.5 lbin |
Conductor cross section: |
0.5 to 1.5 mm² / 20 to 16 AWG |
Conductor stripped length: |
5 to 6 mm / 0.20 to 0.24 in |
Shell material: |
Plastic |
Color: |
Orange |
Environmental |
|
Ambient temperature: |
-20 °C to 40 °C / -5 °F to 105 °F |
Humidity |
30 % to 70 % RH |
Max. altitude |
2000 m / 6562 ft |
Electrical |
|
Power supply: |
110 - 240 VAC, 50/60 Hz |
Power consumption: |
< 1 W |
Sensors, meters |
|
Internal-temperature sensor: |
Yes |
Radio |
|
RF band: |
2400 - 2495 MHz |
Max. RF power: |
<20 dBm |
Wi-Fi protocol: |
802.11 b/g/n |
Wi-Fi Range: |
Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors |
Bluetooth Protocol: |
4.2 |
Bluetooth Range: |
Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors |
MCU |
|
CPU: |
ESP32 |
Flash: |
4 MB |
Firmware capabilities |
|
Webhooks (URL actions): |
20 with 5 URLs per hook |
Scripting: |
Yes |
MQTT: |
Yes |
Basic wiring diagrams
|
|
Legend
Terminals |
|
Cables |
|
---|---|---|---|
SW1, SW2, SW3, SW4 |
Switch/button input terminals |
L |
Live (110-240 V) cable |
L |
Live (110-240 V) terminals |
N |
Neutral cable |
N |
Neutral terminal |
|
|
Troubleshooting
...
Web Interface guide
Read the Shelly Plus i4 web interface guide
Техническая поддержка
Способы оплаты
Доставка
Оптовые продажи
Наш блог
Введите известный Вам промокод и цены будут автоматически снижены
Будьте в курсе новинок и специальных предложений